EN AW-5005 · AlMg1
A low-magnesium alloy prized for its anodizing response: the finish comes out clear and uniform, matching architectural anodized 6063 extrusions. Moderate strength with very good forming.
Material Data
Composition and physical properties
| Element | Limit / range |
|---|---|
| Si | ≤ 0.30 |
| Fe | ≤ 0.7 |
| Cu | ≤ 0.20 |
| Mn | ≤ 0.20 |
| Mg | 0.50 – 1.1 |
| Zn | ≤ 0.25 |
| Cr | ≤ 0.10 |
| Al | balance |
Limits per EN 573-3 / applicable registration. The governing specification on your order prevails.
| Property | Value |
|---|---|
| Density | 2.70 g/cm³ |
| Melting range | 632 – 654 °C |
| Thermal expansion (20–100 °C) | 23.8 µm/m·K |
| Elastic modulus | 69 GPa |
| Thermal conductivity | 200 W/m·K |
| Electrical conductivity | 52 % IACS |
Strength Data
Mechanical properties by temper
Typical room-temperature values for orientation. Design minimums depend on product form, thickness and the governing specification — request the applicable table with your inquiry.
| Temper | Yield strength (MPa) | Tensile strength (MPa) | Elongation (%) | Hardness (HB) |
|---|---|---|---|---|
| H111 | 45 | 110 | 22 | 30 |
| H14 | 150 | 160 | 6 | 45 |
| H18 | 195 | 200 | 4 | 51 |
| H34 | 140 | 160 | 8 | 41 |
Designations & Standards
How this alloy appears on drawings
| System | Designation |
|---|---|
| ISO / EN designation | AlMg1 |
| EN numeric | EN AW-5005 |
| UNS | A95005 |
| Werkstoff-Nr. | 3.3315 |
| Common product standards | EN 485 / EN 573-3 · ASTM B209 · BS N41 · WNr 3.3315 |
Supply Program
Available from Lipol as
| Product form | Standard | Alloy | Temper | Category |
|---|---|---|---|---|
| Plate | EN AW | 5005 | H111 | Machinery, Automotive & Mold |
| Plate | WNR 3.3315 | 5005 | H14 | Machinery, Automotive & Mold |
| Plate | BS N41 | 5005 | H18 | Machinery, Automotive & Mold |
| Plate | ASTM B209 | 5005 | H34 | General Industry |
Additional tempers, forms and specifications available on request — the table shows the standard program.
Applications
Where EN AW-5005 is the right answer
- Anodized architectural sheet and panels
- Appliance trim and cladding
- Electrical conductor sheet
- Interior design elements
Specifying EN AW-5005?
State the temper, product form, dimensions and governing standard from the tables above, and we will confirm availability with a firm price and delivery date — typically within one business day.
Request a QuoteMaterial Engineering
Not sure EN AW-5005 is the right alloy?
Describe the application — load, environment, joining, finishing — and our engineers will confirm the choice or propose a better-value alternative.